Gigabyte reveals entry-level board with dual-UEFI BIOS

Gigabyte reveals the GA-H61MA-D3V rev 2.0, the company's first entry-level $50 board with dual-UEFI BIOS. Full details at TPU, the motherboard will start shipping in May.

In Japan, the company released the latest revision of the GA-H61MA-D3V (rev. 2.0), an entry-level socket LGA1155 motherboard based on the Intel H61 chipset, which features Dual-UEFI. Apart from this, the board also features GIGABYTE's Ultra-Durable 4 Classic component loadout, which consists of a new fiberglass fabric weave PCB that's more resistant to humidity that causes short-circuits, high ESD-resistance ICs, anti-surge ICs located on critical circuits, low RDS (on) MOSFETs, and a 100% high-grade solid-state capacitor design.

The CPU is powered by a 5-phase VRM, it is wired to two DDR3 DIMM slots supporting up to 16 GB of dual-channel DDR3 memory. Expansion slots include one PCI-Express 3.0 x16, and three PCIe x1. The move to exclude legacy PCI is not only progressive, but could also save GIGABYTE the cost of placing a PCI-PCIe bridge chip. Storage connectivity includes two SATA 6 Gb/s ports from Marvell 88SE9172 (since H61 PCH lacks SATA 6 Gb/s), and four SATA 3 Gb/s ports from the PCH. Other connectivity includes 6-channel HD audio (driven by Realtek ALC887), two USB 3.0 ports (driven by EtronTech EJ168), gigabit Ethernet (driven by Realtek 8111E), and a number of USB 2.0 ports. Display connectivity includes DVI and D-Sub

Gigabyte reveals entry-level board with dual-UEFI BIOS - More news at DV Hardware

EVGA reveals SR-X dual-socket Sandy Bridge-E board

The Tech Report spotted EVGA's SR-X at CES 2012, you can check it out over here.This enthusiast board takes two Sandy Bridge-E Xeon processors.

The new SR-X retains the dual-Xeon design of its forebear but swaps that board's LGA1366 sockets for compatibility with Intel's 2011-pin Sandy Bridge-E silicon. Alas, you won't be able to plug a couple of desktop-oriented CPUs like the Core i7-3960X into the SR-X; it's designed for Xeons exclusively. Just two Sandy Bridge-E based Xeons offer plenty of PCI Express 3.0 connectivity, allowing the SR-X to serve its seven expansion slots without tapping the PCIe lanes built into the chipset. EVGA does use a PLX switch chip to split the PCIe 3.0 lanes between the multiple slots, though.

On the chipset front, the board features an "Intel C600" platform hub that looks an awful like what the X79 should have been. See that pair of SAS connectors in the bottom right-hand corner of the board? It seems Intel has resolved the storage-controller issues that left the X79 with no more SATA ports than a run-of-the-mill desktop chipset.

EVGA reveals SR-X dual-socket Sandy Bridge-E board - More news at DV Hardware