Friday, 2 December 2011

NVIDIA 28nm desktop GPU roadmap leaked

Details about NVIDIA's upcoming 28nm desktop GPUs were leaked by Asian tech site 4Gamer. The slide reveals NVIDIA's low-end parts (GK107) will arrive around Q2 2012, with mainstream parts (GK106) to follow by late Q2 2012 and a new high-end part (GK104) by mid-2012. Shortly after that we can expect a new dual-GPU model (GK110), and a new massive die chip (GK112) is anticipated by the end of the year or early 2013.
In 2012, NVIDIA is expected to embrace AMD's sweet-spot strategy, with no massive die. Instead, the top single GPU part will be GK104, featuring 384-bit 1.5 GB GDDR5 memory. GK104 is said to push out 2 TFLOPS, 30% higher than GTX 580. However, despite the smaller die, 4Gamer claims it consumes over 250W power. GK104 will release bang in the middle of 2012, perhaps during Computex time. Following right after GK104 will be GK110 - a dual GK104 flagship, thus completing NVIDIA's line-up for most of 2012 - remarkably similar to AMD's sweet spot strategy.

However, not for long, as late in 2012 / early 2013, NVIDIA plans to return back to a massive die with GK112, featuring 512-bit memory.


Source: VR Zone

NVIDIA 28nm desktop GPU roadmap leaked - More news at DV Hardware

AMD Radeon HD 7000 Mobility GPUs to be launched on December 5?

TPU picked up a rumor that AMD's first Radeon HD 7000 series cards may be introduced next week. The mobile parts are expected to be launched first, or perhaps the company will show off its GCN architecture.
It is indicated that products launched on that day will be based on GPUs built on the 28 nanometer fabrication process. The new products will be unveiled in London. It's likely that these are mobile parts based on the "Thames" and "Seymour" silicons. An alternate theory is that AMD could unveil some of its next-generation GPUs based on the GCN architecture, AMD's biggest leap in GPU architecture since Radeon HD 2000 series.


AMD Radeon HD 7000 Mobility GPUs to be launched on December 5? - More news at DV Hardware

Acer: HDD shortage to intensify in December

Acer VP Scott Lin told DigiTimes that PC vendors will see more serious HDD supply issues in December as HDD inventory levels will soon hit bottom:
As PC brand vendors' hard disc drive (HDD) inventory level will soon hit bottom, vendors will start experiencing HDD shortages in December and the problem will reach its peak in February until recovery comes in March, according to Acer vice president Scott Lin.

Despite PC brand vendors having already taken measures to secure and expand supply sources right after Thailand's flood, sources from the upstream supply chain still estimate that the hard drive supply gap will reach 35% in the fourth quarter with PC vendors starting feeling the pressure in December.

Acer pointed out that all the newly-made notebook models will have price increases of 2-3%, in addition to the extra cost of HDD, the increased price will also cover the extra cost for adopting Intel's new CPUs such as Core i3 2330, 2430 and Core i5 2450.


Acer: HDD shortage to intensify in December - More news at DV Hardware

NVIDIA GeForce GTX 560 Ti 448 Cores launched

NVIDIA introduced the GeForce GTX 560 Ti 448 Cores, a new 40nm GF110 based card with 448 CUDA cores, 1280MB GDDR5 and a 320-bit memory bus.

The card features a 732MHz core, 1464MHz shaders and 3800MHz GDDR5 memory. The reference design draws power from two 6-pin PCI Express power connectors and includes two DVI outputs and one Mini-HDMI output.

Pricing is $289 but it's a limited edition release that will only be sold in North America, Germany, France, Scandinavia and Russia.

NVIDIA GeForce GTX 560 Ti 448 Cores launched - More news at DV Hardware

Intel Ivy Bridge details and benchmark figures leak

Legit Reviews found details about Intel's upcoming Ivy Bridge processors at Russian tech site Overclockers.ru:
Of the 18 models listed one is dual-core and all the others are quad-core processors. It looks like the Intel Core i7-3770K will be the unlocked processor that enthusiasts will be after. The Intel Core i7-3770K features four cores with a base clock speed of 3.5GHz. The processor does have Hyper-Threading, 8MB of shared L3 cache and a 3.9GHz turbo clock speed. The site also mentions that the Intel Ivy Bridge processors are scheduled to be releases in April 2012.


Additionally, LR also found benchmarks of the Ivy Bridge 22nm B3 stepping, you can check out the results over here.

Intel Ivy Bridge details and benchmark figures leak - More news at DV Hardware

More Ivy Bridge details leaked

VR Zone found even more Ivy Bridge details, you can read it over here.
A lot of details were missing in the initial leak and we can now fill in the blanks, especially with regards to the graphics and how the upcoming Ivy Bridge processor fit into Intel's echo system compared to the current Sandy Bridge processors.

Starting with the graphics, we have two graphics options in the desktop parts, Intel HD Graphics 4000 and Intel HD Graphics 2500. The main difference here beyond clock speeds is that we're expecting the execution units to be at least 1/3 greater in the HD 4000 parts compared to the HD 2500 parts, unless Intel has changed something last minute. The Core i7-3770K, Core i7-3770, Core i7-3770S, Core i7-3770T, Core i5-3570K as well as the oddly named Core i5-3475S will be the only ones with HD 4000 graphics, the rest get to make do with HD 2500 graphics.


More Ivy Bridge details leaked - More news at DV Hardware

Firmware exploit could set some HP printers on fire

Security researchers discovered printers from HP and possibly other printer makers are vulnerable to firmware exploits. Affected printers connect to the Internet and use a "Remote Firmware Update" process to update the printer's software, but because the updates are unsigned they can come from anyone.

Hackers can use the exploit to steal personal information and perhaps even set offices on fire. Columbia University Professor Salvatore Stolfo showed the press how attackers can heat up a printer fuser. During the demonstration paper in the printer turned brown and began to smoke before the printer's temperator-sensor shut off the printer to prevent a fire. But not all printers have such a safeguard.

HP insists it adopted digital signing on all its new printers since 2009, but the researchers found unsigned printers still being sold at office retailers in September 2011.
The attack can occur remotely, if the printer is set up for "cloud printing" as HP is particularly fond of. Researchers scanned the internet and in minutes found 40,000 printers they could have potentially set the "catch fire" command & control package to.

But the true number of vulnerable machines could be much, much higher. Comments Professor Stolfo, "I think it is very wise to broadcast the problem as soon as possible so all of the printer manufacturers start looking at their security architectures more seriously. It is conceivable that all printers are vulnerable. �Printers that are 3-, 4-, 5-years-old and older, I'd think, all used unsigned software. The question is, 'How many of those printers are out there?' It could be much more than 100 million."

Or in the case of good old-fashioned local printers, an on-site attack using a virus laden document print-job can offer equivalent access. Once the printer has received orders, its firmware is updated deleting the standard operating system and installing a malicious variant.

Mikko Hypponen, head of research at Finnish security firm F-Secure, was astounded by the flaw. He comments, "First of all, how the hell doesn't HP have a signature or certificate indicating that new firmware is real firmware from HP? Printers have been a weak spot for many corporate networks. Many people don�t realize that a printer is just another computer on a network with exactly the same problems and, if compromised, the same impact."
More info about the exploit can be read at DailyTech. Security experts warn printer exploits are just the start of a whole new wave of attacks. An increasing number of digital electronics are becoming connected to the Internet, but unfortunately security is usually not a priority when designing these functionalities.

Firmware exploit could set some HP printers on fire - More news at DV Hardware